Cooler Master MasterBox NR200P MAX equipped with power supply and AIO water cooling


Cooler Master said that it will begin to handle the domestic market of the Mini-ITX MasterBox NR200P MAX case equipped with an all-in-one power supply unit and water cooling unit.

The MasterBox NR200P series we detailed earlier, comes standard with an SFX 850W V850 SFX certified PSU with 80PLUS GOLD certification and an all-in-one water cooling device with a 140mm Sickle Flow fan and a 280 mm radiator. The power cable and water tube are sized to fit the case, allowing you to assemble a PC without the hassle of wiring by simply adding the motherboard, hard drive, and graphics card. There are three expansion slots and a PCI-Express 4.0 riser cable is provided. 3.5 inch phantom bay x1, 2.5/3.5 inch phantom bay x1, 2.5 inch phantom bay x2. The cooling fan measures 120mm x 2 at the top and 140mm x 2 at the bottom (120mm x 1 when a 3.5 inch hard drive is installed).

The external dimensions are 185mm wide, 377mm deep and 292mm high. The tempered glass and steel side panel is 67mm high, the PSU is 130mm deep (SFX/SFX-L), and the graphics card is 336mm long, 160mm wide, and 75mm deep. thickness. The kit will cost 349 EUR/USD.





Click here to post a comment for this news on the message board.

Check Also

Mumbai: BMC cut power and water but building got ‘repairable’ report | Bombay News

Last April, the BMC had identified 337 dilapidated buildings in Mumbai. (file photo) MUMBAI: The …